Configuration Of Wavlink AC1200 Repeater Device

[jimmiegalvin]

It is a dual-band wireless router that offers high-speed internet connectivity with an easy Wavlink AC1200 setup process. To configure the Wavlink device, you can follow the steps below:

First, connect your Wavlink router to a power source and turn it on. Connect your computer or laptop to the Wavlink router using an Ethernet cable or connect to the default WiFi network (SSID) provided by the Wavlink router. Open a web browser on your device and type in the default IP address of the Wavlink router in the address bar. In most cases, 192.168.10.1 is the IP address by default. Enter the default login credentials for the Wavlink router on the login page. 'Administrator' is usually the default username and password. Once you have successfully logged in, you will be taken to the router's configuration page. Here, you can set up your wireless network, change your network name (SSID), set a password, and configure other settings. After making the desired changes, make sure to save the settings and reboot the router for the changes to take effect.