Homemade SMP

[MIHAIRGUY]

Ok guys , just find out that Dermimatch clinic from Arizona http://www.dermimatch.com/faq-pricing.html
sell their products in Amazon

Their Machine at 200$
https://www.amazon.com/DermiMatch-Sc...DermiMatch+LLC

and their pigments at 130$
https://www.amazon.com/Scalp-micropi...DermiMatch+LLC

I sent them an email if the products are real or scum and they answered me that its original.
They also will support me with video and infos to make it alone

Any Update?

[maxb]

I looked into that myself (reposting from HIS forum):

==
The cost of SMP treatment is $2000+ or so, plus the expense and inconvenience of travel.

However, I noticed that one can buy SMP equipment for 1/4 of that (which includes everything, plus tutorials) Machines used to do semi-permanent makeup on eyebrows are even cheaper ($50 including needles, but no ink).

From what I can tell, these machines are basically identical: they push a disposable needle out many times per second, but perhaps the thickness of the needle is different -- I don't know (For eyebrows, they sometimes use many needles arranged into a line that they call a "microblade", but I think a single needle is also an option)

Granted, a practitioner might have a heck of a lot of experience, but what one lacks in experience he can make up in caution -- start with a single dot to test for allergies and dot thickness and stretch out the process over many more sessions. Has anyone here looked into that?

==

I'm on the fence about SMP: My hair is visible only when it's long enough to be easily felt, so I'm probably not a good candidate.

But if I were to do it, I'd do it super-carefully:

1. buy ink with known non-cancerogenic ingredients (or make it myself) and try different dilution levels.

2. practice on some inanimate objects

3. put a single dot on my knee-cap

4. wait X weeks, see if I'm happy. Otherwise go back to #3 and try different needles or technique

5. put a single dot on my scalp and wait X weeks.

6. put 10 dots (all far apart) and wait X weeks

7. put 100 dots (all far apart) and wait X weeks

8. put 1000 dots (all far apart) and wait X weeks

9. put 1000 dots (all far apart) and wait X weeks

10. put 1000 dots (all far apart)

The overall process would take 6X weeks (X should probably be 2-4) and a few hours of my own labor.

I have about 5 square inches of recession (3000 mm^2). This would cover it at 1 dot per mm^2, which is my natural density where I still have hair.

I also have diffuse thinning on top, in addition to the recession, but it doesn't seem to be noticeable, when my hair is trimmed at #1 or below yet, so I would wait on addressing that.

==