Started RU 3 Weeks ago

[hellouser]

hellouser; thanks for the detailing on heating CB, etc. Ive saved your post for later reading.

So, to your knowledge, we won't be having to send back the form 1 Cb in order to receive /have shipped the form 2?

Also, do you by chance have any idea how using the form 1 CB would work for me, having purchased DMi/DMSO alongside? Is it worth trying? Still very new to all this business.

I dont know yet, everything is still up in the air. Only reason why I'm continuing to use CB is because I don't want to waste time without it. However I am concerned that the near boiling point of water temperature may affect efficacy. Lets hope not. But the whole form debacle won't last for long.

I'm not sure about DMI/DMSO, you'll have to give it a shot.

[clandestine]

hellouser; thanks for the detailing on heating CB, etc. Ive saved your post for later reading.

So, to your knowledge, we won't be having to send back the form 1 Cb in order to receive /have shipped the form 2?

Also, do you by chance have any idea how using the form 1 CB would work for me, having purchased DMi/DMSO alongside? Is it worth trying? Still very new to all this business.

[clandestine]

I have experienced fin like sides on RU.

While rare, it can happen. I am extremely androgen sensitive, and experience gynecomastia symptoms on doses as little as 50mg continued use.

I've tried fin in the past, experiencing the same gynecomastia symptoms. For some, RU is definitely not side effect free.

Most are fine though, Cob.

[hellouser]

Thanks hellouser, am thinking of giving RU a go first before CB, probably mpb premixed 2% to see how i react,
Have heard of people having similar Fin like sides on RU and since im sensitive and react to pretty much everything, i am worried

Cases of people having side effects from RU compared to Fin are very very low. You should be fine, but if I were you, I'd just get 5g from Kane as a test batch and make your solutions with concentration yourself. That way you wont be limited to 2% because 2% is pretty useless.

[Cob984]

Thanks hellouser, am thinking of giving RU a go first before CB, probably mpb premixed 2% to see how i react,
Have heard of people having similar Fin like sides on RU and since im sensitive and react to pretty much everything, i am worried

[hellouser]

Hellouser, If I want to buy CB today how should I go about it?
Thanks man

Also, are you using fin? if so is it because of sides? which sides specifically

As jlantern confirmed, I do not use Finasteride (and never have). That stuff is meddling with major risks. I'd rather go bald than lose function of my penis.

CB you can purchase through Kane.

[jlantern]

Hellouser, If I want to buy CB today how should I go about it?
Thanks man

Also, are you using fin? if so is it because of sides? which sides specifically

In this thread he clearly says he does not use fin and his source is Kane

[Cob984]

Hellouser, If I want to buy CB today how should I go about it?
Thanks man

Also, are you using fin? if so is it because of sides? which sides specifically

[hellouser]

Truth. Admin won't be asking for us to send it back or anything? Honestly I'm excited to start CB, but don't know if I should bother with the one just received, the form 1. I will be trying with DMi/DMSO..

How are you going about heating it up?

I use a small 7ml bottle to make 4-5 day batches of CB (I use more than 1ml at a time). Lets say I put 45mg of CB into the bottle, and 2.25ml of Everclear. I then boil water in an electric kettle and pour a little bit of water into a cup. I then put the bottle of CB with Everclear into the cup and let it sit until it dissolves.

CB is supposed to have a threshold of about 120 degrees celsius. Boiling point of water is 100 degrees. The water I use is definitely less than 100 degrees so it should withstand.

Then I add my PG (2.25ml) for a total of 4.5ml of prepared CB at 1%, which I then use 1.5ml at a time which lasts me 3 days.

[clandestine]

Bingo.

But its still CB and as effective but won't dissolve. Mine's dissolving after heating up to around 70-90 degrees celsius. I'm still using it along with RU and Minox. Hairline is definitely thickening up!

Truth. Admin won't be asking for us to send it back or anything? Honestly I'm excited to start CB, but don't know if I should bother with the one just received, the form 1. I will be trying with DMi/DMSO..

How are you going about heating it up?

[hellouser]

Hellouser; was the CB received in the last GB form 1 Aden (cannot be dissolved in pg..), as opposed to form 2 which is required, and must be re-made and then re-shipped?

Bingo.

But its still CB and as effective but won't dissolve. Mine's dissolving after heating up to around 70-90 degrees celsius. I'm still using it along with RU and Minox. Hairline is definitely thickening up!

[hellouser]

Hellouser: Curious to why you haven't started this treatment ASAP if the results are what they seem. This could be huge in terms of regrowth.

Does Kane offer BNP? Where can I purchase this as I am based in the US? Where can I purchase the vehicle?

This seems really promising...

Gotta acquire both the vehicle and the peptide before starting. I'm working on it though.

Kabe does offer BNP through a group buy. Not sure about the vehicle, various sources are out there but theres an issue with the supplier. May have to look elsewhere or use something else.

[clandestine]

Hellouser; was the CB received in the last GB form 1 Aden (cannot be dissolved in pg..), as opposed to form 2 which is required, and must be re-made and then re-shipped?

[StayThick]

Hellouser: Curious to why you haven't started this treatment ASAP if the results are what they seem. This could be huge in terms of regrowth.

Does Kane offer BNP? Where can I purchase this as I am based in the US? Where can I purchase the vehicle?

This seems really promising...

[hellouser]

Hellouser: I noticed you keep mentioning BNP-32. Why are you so inclined to try a product you have no idea the effects would be to your body?

BNP-32 is already produced in your body. BNP-32 levels are actually increased when heart failure occurs.

Do you know anyone that has tried this?

Yes, many people. Look into Nesiritide.

What's the vehicle?

Vehicle used was Lubrajel.

You claim the results are better than CB and RU, yet nobody on this forum barely uses CB or at least discusses it as a treatment they currently are using.

I never made this claim. I did however state that the results from the small trials (found here: http://www.faqs.org/patents/app/20120238498) put all other treatments to shame.

I'm not attacking you, I'm just curious to why you are so confident experimental treatments like CB and BNP would be effective when so little info is out about them.

I'm not 'confident' however I am optimistic and hopeful. CB's results from Cosmo show density increased from about 70 hairs/cm2 to about 110 hairs/cm2, nearly a 60% increase in density. Others using CB are already seeing results.

Thanks for all the information you provide on this forum by the way. Your posts have been extremely beneficial to me as I gather more knowledge on these experimental treatments.

In regards to BNP, you should look at the source I linked above and pay attention to the test candidates that took BNP with androgenic alopecia. For example;

http://www.faqs.org/patents/imgfull/20120238498_47

That result is remarkable. The usage was 100 mcg/g BNP (so 100mcg in 1g of Lubrajel). It was used twice a day for 3 weeks and kept working for many months after as it is clearly visible due to the length of hair.